Catalog pricing shown. Please Sign In to see your pricing.
Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 80Pct Low Nox Gas Furnace 045 MBH 16 SEER2
Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 80Pct Low Nox Gas Furnace 045 MBH 16 SEER2
Kit Includes PVC Ptrap Kit, Drain Pan Float Switch, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, Whip, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, No Vent Caps, 2" Plastic Pad, 30x60 Goliath Drain Pan, 2H/2C Thermostat
Motor Freight
- Vendor Name:
- Arcoaire
- URI Part Number:
- Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 80Pct Low Nox Gas Furnace 045 MBH 16 SEER2
- Shipping Weight (Lbs.):
- 200
- Energy Star:
- Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
- Heating Input (BTUH):
- 045 MBH Heat
- Includes:
- H4A7T24AKAWA, F80CTL0451712A, EHD4X24AAL, ACGKIT2H
- Nominal Capacity (BTUH):
- 24000
- Cooling Efficiency (EER2):
- 12.5
- Cooling Efficiency (SEER2):
- 16
- Heating Efficiency HSPF2:
- A/C is Energy Star 6.1 compliant
- System Indoor Type:
- Low Nox Gas Furnace
- System Outdoor Type:
- Multi Stage
- System Coil Configuration:
- Horizontal Slab
- Furnace Efficiency:
- 80
- System Nominal Tons:
- 2.0 Ton
- AHRI System Number:
- 210695004
A/C, Single Phase, Split Gas Furnace Multi Stage, Horizontal Slab H4A7T/F80CTL/EHD4X
Air Conditioner Condenser
Air Conditioner Condenser
- 2 Stage Copeland Scroll Ultratech Compressor
- Welded Aluminum Tube / Aluminum Fin Coil
- Improved Efficiency w/ Multi Directional Internal Enhancements
- Less Sensitivity to Pressure Drop
- Heat Shrink Wrap Protects Copper / Aluminum Joints
- AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
- Approximately 50% Lighter than Copper Coils
- Filter Drier Supplied for Field Installation
- Self Configuring Operation & Text Based Diagnostics w/ Ion Control
- Compressor Sound Blanket & Isolation Grommets Factory Installed
- Extended Service Valve to Accommodate Press Fittings
- High & Low Pressure Switches
- Outdoor Temp Sensor Factory Installed
- Factory Charged w/ R410A Refrigerant
- Long Line Set Capability (refer to spec sheet for details)
- Low Ambient Cooling Capable w/ Optional Kit
- Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
- Corner Posts for Added Cabinet Strength
- Coated Hail Guard Coil Protection
- Post Painted (black) Coil
- Coated Cabinet Screws
- Internal Pressure Relief Valve & Thermal Overload
Gas Furnace
- 2 Stage Gas Valve & Inducer Motor
- High Efficiency Variable Speed Constant CFM Motor
- Dehumidification Feature
- Insulated Blower Compartment
- Supports 2 Stage Cooling
- Low NOx CA approved
- Four position - upflow/downflow/horizontal installation
- 33-1/3” (847mm) high
- Electronic Air Cleaner & Humidifier terminals
- Factory shipped for natural gas, with Propane gas conversion kits available
- Category I venting (Common venting with other Category I appliances)
- Three position inducer elbow capability
- Masonry chimney adapter available
- Through the casing flue pipe for counterblow applications
- RPJ Aluminized steel heat exchanger
- In-shot burners
- Direct ignition with Silicon Nitride Ignitor
- Innovative knobs for easy door removal and secure attachment
- Self diagnostics
- Thermostatic Expansion Valve (TXV)
- Horizontal bi-directional airflow design
- Sturdy galvanized steel cabinet
- Non-ozone-depleting R-410A refrigerant
- Capacity: 2 - 5 tons
- Cased horizontal slab coil design for bi-directional airflow
- Corrosion-resistant all-aluminum coil
- Fully insulated cabinet
- Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup